Everspring SA413 Z-Wave USB Stick with Openhab2

I just made Eversprint SA413 Z-Wave USB stick working with Openhab2, no special driver or special configuration is needed, it just working. This stick is bloody cheap, it only cost me £5.99 from the ebay.

Also the Heima Z Wave Door/Window Sensor (HS1DS) working fine with SA413 in Openhab2.

Configuration and pair can be done via the Habmin.



Here is a small user manual for HS1DS ZWAVE door sensor:

  1) Slide the back to one end to remove the back.
  2) Press the small switch a few (some people say 3) times, light on front will blink green indicate pair mode
  3) Hold the switch while install the battery will do factory reset which will erase setting. (Not checked, forgot where I read this)